Reset Your LG Dishwasher Error Code AE in 3 Simple Steps

Experiencing an LG dishwasher error code AE can be frustrating, interrupting your dishwashing routine. This error code typically indicates a problem with the dishwasher’s air gap, which is designed to prevent dirty water from flowing back into the dishwasher. By resetting the dishwasher, you can often resolve this error and get your appliance back in working order. In this comprehensive guide, we’ll walk you through the steps on how to reset LG dishwasher error code AE, troubleshooting tips, and helpful FAQs.

Understanding Error Code AE

Before proceeding with the reset, it’s essential to understand what causes error code AE. As mentioned earlier, this error is triggered when the air gap is blocked or malfunctioning. The air gap is a small device installed above the sink that allows air to enter the drain hose, preventing water from siphoning back into the dishwasher. If the air gap becomes clogged with food particles or debris, it can cause the dishwasher to malfunction and display error code AE.

Resetting the LG Dishwasher

To reset your LG dishwasher and clear error code AE, follow these steps:

1. Power Off: Turn off the dishwasher’s power at the circuit breaker or fuse box. Wait for at least 30 seconds.
2. Open the Door: Open the dishwasher door to allow air to circulate inside.
3. Press the Reset Button: Locate the reset button on the dishwasher’s control panel. It’s typically a small button labeled “Reset” or “Cancel.” Press and hold the button for 5-10 seconds.
4. Close the Door: Close the dishwasher door firmly.
5. Power On: Turn the dishwasher’s power back on at the circuit breaker or fuse box.
6. Run a Test Cycle: Start a short test cycle to ensure the dishwasher is functioning properly.

Troubleshooting Tips

If resetting the dishwasher doesn‘t resolve error code AE, try the following troubleshooting tips:

• Check the Air Gap: Inspect the air gap for any blockages or debris. Clean the air gap thoroughly and ensure it’s properly installed.
• Clean the Drain Hose: Disconnect the drain hose from the air gap and check for any clogs or kinks. Clean the hose and reconnect it securely.
• Inspect the Water Inlet Valve: The water inlet valve controls the flow of water into the dishwasher. Check if the valve is clogged or malfunctioning.
• Check the Drain Pump: The drain pump removes water from the dishwasher. If the pump is faulty, it can cause water to accumulate and trigger error code AE.

Summary: Resolving LG Dishwasher Error Code AE

By following the steps outlined in this guide, you should be able to successfully reset LG dishwasher error code AE and resolve the issue. If the error persists after resetting and troubleshooting, it’s recommended to contact LG customer support or a qualified appliance repair technician for further assistance.

Questions We Hear a Lot

Q: Why does my LG dishwasher display error code AE?
A: Error code AE usually indicates a problem with the dishwasher’s air gap, which is designed to prevent dirty water from flowing back into the appliance.

Q: How do I clean the air gap on my LG dishwasher?
A: To clean the air gap, remove the cover and use a wire or brush to clear any blockages or debris. Rinse the air gap thoroughly and reinstall the cover.

Q: Can I reset my LG dishwasher without pressing the reset button?
A: No, pressing the reset button is the only way to reset your LG dishwasher and clear error code AE.

Q: How long should I wait before turning the dishwasher back on after resetting it?
A: Wait at least 30 seconds before turning the dishwasher back on to allow the appliance to completely reset.

Q: Can I fix error code AE on my own?
A: In most cases, you can reset error code AE by following the steps outlined in this guide. However, if the error persists, it’s recommended to contact LG customer support or a qualified appliance repair technician.