Avoid Water Damage: How To Use Oatey Toilet Flange Extender
What To Know
- Test the toilet for leaks by flushing it several times and checking for any water on the floor or around the base of the toilet.
- An Oatey toilet flange extender raises the height of the toilet flange, allowing for a secure connection between the toilet and the drainpipe when the existing flange is too low or damaged.
- If the distance from the top of the existing flange to the finished floor is less than the height of the toilet, you will need an extender.
Installing a toilet flange extender is a crucial step when replacing or repairing a toilet. It ensures a secure and watertight connection between the toilet and the drainpipe. Oatey, a leading manufacturer of plumbing products, offers high-quality toilet flange extenders that are designed for easy installation. This comprehensive guide will provide you with step-by-step instructions on how to use an Oatey toilet flange extender, ensuring a successful and leak-free installation.
Materials You’ll Need
- Oatey toilet flange extender
- Toilet wax ring
- Plumber’s putty (optional)
- Adjustable wrench
- Hacksaw or pipe cutter
- Utility knife
- Measuring tape
Step 1: Measure and Cut the Extender
Measure the distance from the top of the existing flange to the finished floor. Subtract 1/2 inch from this measurement. Cut the Oatey toilet flange extender to the measured length using a hacksaw or pipe cutter.
Step 2: Apply Plumber’s Putty (Optional)
If desired, apply a thin layer of plumber’s putty to the bottom of the extender. This will help create a watertight seal.
Step 3: Align and Position the Extender
Align the Oatey toilet flange extender over the existing flange and push it down firmly. Ensure that the extender is centered and level.
Step 4: Secure the Extender
Use an adjustable wrench to tighten the bolts that secure the extender to the existing flange. Tighten the bolts evenly and snugly, but avoid overtightening.
Step 5: Install the Toilet Wax Ring
Place the toilet wax ring on the top of the Oatey toilet flange extender. Center the wax ring and press it down firmly to create a seal.
Step 6: Set the Toilet
Carefully lift the toilet and align it with the bolts. Lower the toilet onto the wax ring and press down firmly.
Step 7: Tighten the Toilet Bolts
Use an adjustable wrench to tighten the toilet bolts. Tighten the bolts evenly and snugly, but again, avoid overtightening.
Troubleshooting Common Issues
- Toilet is not level: Check the level of the extender and make sure it is properly seated on the existing flange. Adjust the bolts as needed to level the toilet.
- Toilet rocks: Ensure that the bolts are tightened evenly and securely. If necessary, apply additional plumber’s putty to the base of the extender.
- Water leaks around the base of the toilet: Check the wax ring to make sure it is properly seated and not torn. If necessary, replace the wax ring.
Tips for a Successful Installation
- Use a new toilet wax ring each time you install a toilet.
- Apply a bead of silicone caulk around the base of the toilet to prevent water seepage.
- Test the toilet for leaks by flushing it several times and checking for any water on the floor or around the base of the toilet.
Top Questions Asked
Q: What is the purpose of an Oatey toilet flange extender?
A: An Oatey toilet flange extender raises the height of the toilet flange, allowing for a secure connection between the toilet and the drainpipe when the existing flange is too low or damaged.
Q: How do I know if I need an Oatey toilet flange extender?
A: If the distance from the top of the existing flange to the finished floor is less than the height of the toilet, you will need an extender.
Q: Can I use an Oatey toilet flange extender with any type of toilet?
A: Yes, Oatey toilet flange extenders are compatible with most types of toilets, including standard, elongated, and skirted toilets.