Upgrade Your Bathroom In No Time: Learn How To Install Oatey’s Toilet Flange Spacer
What To Know
- A toilet flange spacer is a device used to raise the height of the toilet flange, which is the base where the toilet bowl connects to the floor.
- Use a measuring tape to determine the difference in height between the existing flange and the desired height for the toilet bowl.
- If there is a leak around the base of the toilet, check if the wax ring is damaged or if the flange spacer is not creating a tight seal.
Installing an Oatey toilet flange spacer can be a simple yet crucial task for ensuring a secure and leak-free toilet installation. This guide will provide step-by-step instructions to help you successfully complete this project.
Understanding the Purpose of a Toilet Flange Spacer
A toilet flange spacer is a device used to raise the height of the toilet flange, which is the base where the toilet bowl connects to the floor. This is necessary when the existing flange is too low or uneven, causing the toilet to wobble or leak.
Materials Required
- Oatey toilet flange spacer
- Measuring tape
- Pencil
- Hacksaw
- Adjustable wrench
- Plumber’s putty
- Toilet wax ring
Step-by-Step Installation Guide
1. Measure the Height Difference
Use a measuring tape to determine the difference in height between the existing flange and the desired height for the toilet bowl.
2. Cut the Spacer
Mark the desired height on the spacer using a pencil. Use a hacksaw to cut the spacer to the correct length.
3. Apply Plumber’s Putty
Roll a bead of plumber’s putty around the bottom of the spacer. This will help create a watertight seal.
4. Install the Spacer
Place the spacer over the existing flange and press down firmly. Use an adjustable wrench to tighten the bolts that secure the spacer to the flange.
5. Set the Toilet
Place the toilet bowl on top of the spacer and align the bolt holes. Insert the bolts and tighten them until the toilet is secure.
6. Install the Wax Ring
Apply a wax ring around the base of the toilet bowl, ensuring it creates a complete seal.
7. Set the Toilet Bowl
Lower the toilet bowl onto the wax ring and press down firmly.
Additional Tips
- If the existing flange is damaged or broken, it should be replaced before installing the spacer.
- Use a level to ensure the toilet is level after installation.
- Allow the wax ring to cure for 24 hours before using the toilet.
Troubleshooting Common Issues
- Toilet Wobbles: If the toilet wobbles after installation, check if the flange spacer is securely tightened or if the wax ring is properly installed.
- Leaks: If there is a leak around the base of the toilet, check if the wax ring is damaged or if the flange spacer is not creating a tight seal.
Frequently Discussed Topics
Q: How do I know if I need a toilet flange spacer?
A: You need a spacer if the existing flange is too low or uneven, causing the toilet to wobble or leak.
Q: Can I use any type of spacer for my toilet flange?
A: No, it is important to use an Oatey toilet flange spacer, which is specifically designed for this purpose.
Q: How long does it take to install a toilet flange spacer?
A: The installation process can take approximately 30-60 minutes.