Can’t Open Cans Smoothly? Replace Your Edlund Can Opener Gear in Minutes!
What To Know
- Replacing the gear on your Edlund can opener is a simple task that can be completed in a matter of minutes.
- The gear on your Edlund can opener should be replaced every few years, or more often if you use the can opener frequently.
- The gear on your Edlund can opener may need to be replaced if the can opener is making a grinding noise, if the can opener is not opening cans properly, or if the can opener is not turning on.
Replacing the gear on your Edlund can opener is a simple task that can be completed in a matter of minutes. With the right tools and a little bit of patience, you can have your can opener back up and running in no time.
Tools and Materials You’ll Need
- Screwdriver (Phillips head)
- New Edlund can opener gear
- Needle-nose pliers (optional)
Step-by-Step Guide to Replacing the Gear
1. Unplug the Can Opener
Before you begin working on your can opener, make sure to unplug it from the power outlet. This will prevent any accidents from occurring.
2. Remove the Base Plate
Using the screwdriver, remove the screws that hold the base plate in place. The base plate is the bottom part of the can opener that holds the motor and gears.
3. Remove the Motor
Once the base plate is removed, you will need to remove the motor. The motor is held in place by two screws. Remove these screws and carefully lift the motor out of the can opener.
4. Remove the Old Gear
The old gear is located on the bottom of the motor. Use the needle-nose pliers to grasp the gear and pull it off of the motor shaft.
5. Install the New Gear
Place the new gear on the motor shaft. Make sure that the gear is properly aligned and that it fits snugly on the shaft.
6. Reinstall the Motor
Place the motor back into the can opener and secure it with the two screws.
7. Reinstall the Base Plate
Place the base plate back onto the can opener and secure it with the screws.
8. Test the Can Opener
Plug the can opener back into the power outlet and test it out. The can opener should now be working properly.
Troubleshooting Tips
If you are having trouble replacing the gear on your Edlund can opener, here are a few troubleshooting tips:
- Make sure that you are using the correct gear. There are different gears for different models of Edlund can openers. Refer to your can opener’s user manual to find the correct gear for your model.
- Make sure that the gear is properly aligned. The gear must be properly aligned on the motor shaft in order to work properly.
- Make sure that the motor is properly seated. The motor must be properly seated in the can opener in order to work properly.
Wrapping Up
Replacing the gear on your Edlund can opener is a simple task that can be completed in a matter of minutes. By following the steps outlined in this guide, you can have your can opener back up and running in no time.
Information You Need to Know
1. How often should I replace the gear on my Edlund can opener?
The gear on your Edlund can opener should be replaced every few years, or more often if you use the can opener frequently.
2. What are the signs that the gear on my Edlund can opener needs to be replaced?
The gear on your Edlund can opener may need to be replaced if the can opener is making a grinding noise, if the can opener is not opening cans properly, or if the can opener is not turning on.
3. Can I replace the gear on my Edlund can opener myself?
Yes, you can replace the gear on your Edlund can opener yourself. The process is simple and only takes a few minutes.
