Learn How To Replace Bolts In Toilet Tank In Just 5 Minutes!
What To Know
- Use rags and a cleaning solution to clean the surface of the toilet tank where the new bolts will be installed.
- Replacing bolts in a toilet tank is a simple task that can be completed in under an hour.
- The best way to clean the surface of the toilet tank before installing the new bolts is to use rags and a cleaning solution.
Replacing bolts in a toilet tank is a relatively simple task that can be completed in under an hour. By following these step-by-step instructions, you can save yourself the cost of calling a plumber.
Materials You’ll Need
- New toilet tank bolts
- Adjustable wrench
- Hacksaw or reciprocating saw
- Plumber’s putty or silicone sealant
- Rags
Step 1: Turn Off the Water Supply
Locate the water supply valve behind the toilet and turn it clockwise to shut off the water. Flush the toilet to drain the tank.
Step 2: Disconnect the Water Supply Line
Use an adjustable wrench to loosen the nut that connects the water supply line to the fill valve. Disconnect the line and set it aside.
Step 3: Remove the Old Tank Bolts
Use an adjustable wrench to loosen the nuts on the old tank bolts. If the bolts are rusted or corroded, you may need to use a hacksaw or reciprocating saw to cut them off.
Step 4: Clean the Tank Surface
Use rags and a cleaning solution to clean the surface of the toilet tank where the new bolts will be installed. This will help ensure a good seal.
Step 5: Apply Plumber’s Putty or Silicone Sealant
Apply a bead of plumber’s putty or silicone sealant around the base of the new tank bolts. This will help prevent leaks.
Step 6: Install the New Tank Bolts
Insert the new tank bolts into the holes in the toilet tank. Tighten the nuts on the bolts until they are snug, but do not overtighten.
Step 7: Reconnect the Water Supply Line
Reconnect the water supply line to the fill valve and tighten the nut. Turn the water supply valve back on and check for leaks.
Step 8: Reinstall the Toilet Tank
Lift the toilet tank onto the bowl and align the bolts with the holes in the bowl. Lower the tank into place and tighten the nuts on the bolts until the tank is secure.
Step 9: Reconnect the Fill Valve
Connect the fill valve to the water supply line and tighten the nut. Turn the water supply valve back on and check for leaks.
Finishing Touches
Once you have replaced the bolts and reconnected the water supply, you can flush the toilet to test for leaks. If there are no leaks, you have successfully replaced the bolts in your toilet tank.
Final Thoughts
Replacing bolts in a toilet tank is a simple task that can be completed in under an hour. By following these step-by-step instructions, you can save yourself the cost of calling a plumber.
What You Need to Learn
- Can I use any type of bolts to replace the bolts in my toilet tank?
No, you should only use bolts that are specifically designed for toilet tanks.
- How often should I replace the bolts in my toilet tank?
You should replace the bolts in your toilet tank every 5-10 years, or more often if they show signs of rust or corrosion.
- What are the signs of a faulty toilet tank bolt?
The signs of a faulty toilet tank bolt include leaks, loose bolts, and a wobbly tank.
- Can I replace the bolts in my toilet tank without turning off the water supply?
Yes, but it is not recommended. Turning off the water supply will help prevent leaks and make the job easier.
- What is the best way to clean the surface of the toilet tank before installing the new bolts?
The best way to clean the surface of the toilet tank before installing the new bolts is to use rags and a cleaning solution.
