How to Change Your Samsung Refrigerator Water Filter: The Ultimate Step-by-Step Guide
What To Know
- Return to the water supply valve behind the refrigerator and turn it counterclockwise to turn on the water supply.
- If you notice a decrease in water flow or taste, replace the filter immediately.
- If the light remains on, there may be a problem with the filter or the refrigerator’s water system.
Maintaining a clean and purified water supply is crucial for your health and the longevity of your Samsung refrigerator. Changing the water filter regularly is an essential part of this maintenance routine. This guide will provide you with step-by-step instructions on how to effortlessly change the water filter of your Samsung refrigerator.
Materials You’ll Need:
- New Samsung refrigerator water filter
- Clean towel or cloth
Steps to Change the Water Filter:
1. Locate the Filter Housing:
- Open the refrigerator door and look for the filter housing. It is usually located inside the upper right-hand corner of the refrigerator compartment.
2. Turn Off the Water Supply:
- Locate the water supply valve behind the refrigerator. Turn the valve clockwise to shut off the water supply.
3. Remove the Old Filter:
- Grab the old filter and twist it counterclockwise to remove it. Be careful not to spill any remaining water.
4. Prepare the New Filter:
- Remove the plastic cap from the new filter. Soak the new filter in cold water for 5 minutes.
5. Insert the New Filter:
- Align the new filter with the housing and insert it. Twist the filter clockwise until it is snug.
6. Turn On the Water Supply:
- Return to the water supply valve behind the refrigerator and turn it counterclockwise to turn on the water supply.
7. Flush the System:
- Press and hold the water dispenser lever for 5 minutes to flush the system and remove any air bubbles.
Additional Tips:
- Change the water filter every 6 months or as recommended by Samsung.
- If you notice a decrease in water flow or taste, replace the filter immediately.
- If you have difficulty removing the old filter, use a pair of pliers.
- Reset the filter indicator light on your refrigerator’s display after changing the filter.
Troubleshooting:
Water is leaking from the filter housing:
- Ensure the filter is inserted correctly and tightened snugly.
- Check the O-rings on the filter for damage. Replace them if necessary.
Water is not flowing from the dispenser:
- Make sure the water supply valve is turned on.
- Check the filter housing for any clogs.
- Reset the filter indicator light on your refrigerator’s display.
“Replace Filter” light is still on:
- Reset the filter indicator light on your refrigerator’s display.
- If the light remains on, there may be a problem with the filter or the refrigerator’s water system. Contact Samsung customer support.
Questions You May Have
How often should I change my Samsung refrigerator‘s water filter?
Every 6 months or as recommended by Samsung.
What are the signs that my water filter needs to be replaced?
Decreased water flow, changes in taste, or a “Replace Filter” light on your refrigerator’s display.
Can I use a non-Samsung water filter in my Samsung refrigerator?
No, it is recommended to use only Samsung-approved water filters to ensure optimal performance and compatibility.
