How To Drain A Kohler Bathtub In 3 Easy Steps!
What To Know
- The drain strainer is a small, mesh screen that helps to prevent hair and other debris from clogging the drain.
- If the water is still not draining properly after cleaning the drain strainer, you may need to check the drain valve.
- To check the drain valve, simply turn off the water supply to the bathtub and then turn the drain valve clockwise.
Are you struggling to drain your Kohler bathtub? Don’t worry, you’re not alone. Many homeowners encounter this issue, but with the right knowledge and tools, it can be a quick and easy task. In this comprehensive guide, we’ll walk you through the step-by-step process of how to drain a Kohler bathtub, ensuring that your bathing experience remains hassle-free.
Locate the Drain Plug
The first step in draining your Kohler bathtub is to locate the drain plug. Most Kohler bathtubs have a pop-up drain plug located in the center of the bathtub. Simply press down on the top of the plug to open it and allow water to drain.
Remove the Overflow Cover
Once the drain plug is open, you’ll need to remove the overflow cover. This is typically a small, round or oval-shaped cover located on the side of the bathtub, near the top. Use a flathead screwdriver or a coin to gently pry the cover off.
Insert the Drain Snake
If the water is still not draining properly, it’s possible that there’s a clog in the drainpipe. To remove the clog, you’ll need to insert a drain snake into the drain. A drain snake is a long, flexible tool with a hook or auger on the end. Simply insert the drain snake into the drain and slowly turn it clockwise. The hook or auger will catch the clog and break it up, allowing water to drain freely.
Clean the Drain Strainer
The drain strainer is a small, mesh screen that helps to prevent hair and other debris from clogging the drain. Over time, the drain strainer can become clogged with hair and soap scum, which can restrict water flow. To clean the drain strainer, simply remove it from the drain and rinse it under hot water.
Check the Drain Valve
If the water is still not draining properly after cleaning the drain strainer, you may need to check the drain valve. The drain valve is a small, cylindrical device that is located underneath the bathtub. To check the drain valve, simply turn off the water supply to the bathtub and then turn the drain valve clockwise. If the drain valve is working properly, you should hear a clicking sound as it opens.
Reset the Trip Lever
The trip lever is a small, metal lever that is located near the drain plug. The trip lever is used to open and close the drain plug. If the trip lever is not working properly, it can prevent the drain plug from opening and draining the water. To reset the trip lever, simply push it down and then release it.
Wrap-Up: Bathtub Drainage Success
By following these simple steps, you can effectively drain your Kohler bathtub and ensure that your bathing experience is always enjoyable. Remember to regularly clean the drain strainer and check the drain valve to prevent future clogs. With proper maintenance, your Kohler bathtub will provide years of trouble-free use.
Quick Answers to Your FAQs
Q: How often should I clean the drain strainer?
A: It’s recommended to clean the drain strainer at least once a month to prevent clogs.
Q: What type of drain snake should I use?
A: For most bathtub clogs, a small, handheld drain snake is sufficient.
Q: Can I use chemical drain cleaners to unclog my bathtub drain?
A: It’s not recommended to use chemical drain cleaners on Kohler bathtubs, as they can damage the finish.
