How To Fix A Toilet Flange That’s Too Low – A Diy Guide For The Whole Family!
What To Know
- Here is a step-by-step guide on how to fix a toilet flange that is too low.
- Once the toilet is reinstalled, you should caulk around the base of the flange to prevent leaks.
- Fixing a toilet flange that is too low is a relatively simple task that can be completed in a few hours.
A toilet flange that is too low can cause a number of problems, including leaks, wobbly toilets, and even sewage backups. If you are experiencing any of these issues, it is important to fix the flange as soon as possible. Here is a step-by-step guide on how to fix a toilet flange that is too low:
Gather Your Tools and Materials
Before you begin, you will need to gather the following tools and materials:
- Toilet flange repair kit
- Adjustable wrench
- Hacksaw
- Tape measure
- Pencil
- Level
- Caulk gun
- Silicone caulk
Remove the Old Toilet
1. Turn off the water supply to the toilet.
2. Flush the toilet to empty the tank and bowl.
3. Disconnect the water supply line from the toilet.
4. Remove the nuts that hold the toilet to the floor.
5. Carefully lift the toilet up and off the flange.
Inspect the Flange
Once the toilet is removed, you can inspect the flange. If the flange is cracked or damaged, it will need to be replaced. If the flange is simply too low, you can raise it using a flange repair kit.
Raise the Flange
1. Place the flange repair kit over the existing flange.
2. Adjust the bolts on the repair kit until the flange is level and at the correct height.
3. Tighten the bolts until the flange is secure.
Reinstall the Toilet
1. Place the toilet back on the flange.
2. Tighten the nuts that hold the toilet to the floor.
3. Reconnect the water supply line to the toilet.
4. Turn on the water supply and check for leaks.
Caulk Around the Flange
Once the toilet is reinstalled, you should caulk around the base of the flange to prevent leaks.
Level the Toilet
Use a level to make sure that the toilet is level. If the toilet is not level, it can cause the flange to loosen over time.
Tighten the Nuts Regularly
Over time, the nuts that hold the toilet to the floor can loosen. It is important to tighten these nuts regularly to prevent the toilet from becoming wobbly.
Troubleshooting
If you are having trouble fixing a toilet flange that is too low, there are a few things you can try:
- Make sure that the flange is the correct size for your toilet.
- Make sure that the flange is level.
- Make sure that the nuts that hold the toilet to the floor are tight.
- If you are still having problems, you may need to call a plumber.
Key Points
Fixing a toilet flange that is too low is a relatively simple task that can be completed in a few hours. By following the steps in this guide, you can save yourself the cost of calling a plumber.
Top Questions Asked
How do I know if my toilet flange is too low?
There are a few signs that your toilet flange may be too low, including:
- The toilet is wobbly.
- The toilet leaks at the base.
- The toilet bowl is not level.
What are the consequences of having a toilet flange that is too low?
A toilet flange that is too low can cause a number of problems, including:
- Leaks
- Wobbly toilets
- Sewage backups
- Damage to the floor
How can I prevent my toilet flange from becoming too low?
There are a few things you can do to prevent your toilet flange from becoming too low, including:
- Tighten the nuts that hold the toilet to the floor regularly.
- Use a level to make sure that the toilet is level.
- Caulk around the base of the flange to prevent leaks.
