How To Get The Fill Valve Out Of Your Toilet: A Step-by-step Guide!
What To Know
- If the old fill valve has a washer, remove it from the bottom of the fill valve.
- If the new fill valve includes a washer, install it onto the bottom of the fill valve.
- Once the water starts filling the tank, adjust the water level by turning the adjustment screw on top of the fill valve.
A malfunctioning fill valve can lead to a variety of toilet-related problems, from constant running to slow refills. Replacing the fill valve is a relatively straightforward task that can be completed in a few simple steps. This guide will provide you with a comprehensive understanding of how to get fill valve out of toilet, ensuring a trouble-free toilet experience.
Materials You’ll Need:
- Adjustable wrench
- Phillips head screwdriver
- New fill valve
- Plumber’s putty (optional)
Step-by-Step Instructions:
1. Shut Off Water Supply:
Locate the water supply valve behind the toilet and turn it clockwise to shut off the water supply.
2. Flush the Toilet:
Flush the toilet to drain the water from the tank.
3. Disconnect the Water Supply Line:
Using an adjustable wrench, loosen the nut that connects the water supply line to the fill valve. Disconnect the water supply line and drain any remaining water.
4. Unscrew the Fill Valve:
Using a Phillips head screwdriver, unscrew the two screws that hold the fill valve in place. Gently pull the fill valve straight up out of the toilet tank.
5. Remove the Old Washer:
If the old fill valve has a washer, remove it from the bottom of the fill valve. Inspect the washer for any signs of damage or deterioration.
6. Install the New Washer:
If the new fill valve includes a washer, install it onto the bottom of the fill valve. Ensure that the washer is properly seated.
7. Insert the New Fill Valve:
Insert the new fill valve into the toilet tank and align it with the mounting holes. Secure the fill valve with the two screws.
8. Reconnect the Water Supply Line:
Reconnect the water supply line to the fill valve and tighten the nut securely using an adjustable wrench.
9. Turn on Water Supply:
Turn the water supply valve counterclockwise to turn on the water supply.
10. Adjust Water Level:
Once the water starts filling the tank, adjust the water level by turning the adjustment screw on top of the fill valve. The ideal water level is about 1 inch below the top of the overflow tube.
Troubleshooting Tips:
- If the fill valve continues to run after adjusting the water level, check for a faulty flapper valve.
- If the fill valve is leaking from the base, tighten the nut that connects it to the tank.
- If the fill valve is making a loud noise, try replacing the washer.
Wrapping Up:
Replacing a fill valve is a simple task that can be completed in under 30 minutes. By following these steps, you can effectively remove the old fill valve and install a new one, ensuring a properly functioning toilet. Remember to adjust the water level and check for leaks to prevent any future problems.
Frequently Asked Questions:
Q: Can I replace a fill valve without turning off the water supply?
A: No, it is essential to turn off the water supply before replacing the fill valve to prevent flooding.
Q: How often should I replace my fill valve?
A: Fill valves typically last for several years, but they may need to be replaced sooner if they become damaged or start to leak.
Q: What other problems can a faulty fill valve cause?
A: A faulty fill valve can also lead to overflowing, slow flushing, or a constantly running toilet.
