How To Replace Your Toilet Flush Push Button In Just 10 Minutes!

Replacing a toilet flush push button is a simple task that can be completed in a matter of minutes. By following these step-by-step instructions, you can easily restore your toilet to proper working order.

Tools and Materials

• New toilet flush push button
• Screwdriver
• Pliers (optional)

Safety Precautions

Before you begin, turn off the water supply to the toilet. This will prevent water from leaking out when you remove the old push button.

Step-by-Step Instructions

1. Remove the Old Push Button

Locate the two screws that hold the push button in place. They are typically located on the top of the button. Using a screwdriver, loosen the screws and remove the push button.

2. Inspect the Push Rod

Once the push button is removed, you will see a metal rod that connects the button to the flush valve. This rod is called the push rod. Inspect the push rod for any damage or corrosion. If the push rod is damaged, it will need to be replaced.

3. Remove the Push Rod (Optional)

If the push rod needs to be replaced, you will need to remove it. To do this, use pliers to grip the push rod and pull it straight out.

4. Install the New Push Rod (Optional)

If you removed the old push rod, insert the new push rod into the hole. Make sure that the rod is fully inserted and that it is not bent or kinked.

5. Install the New Push Button

Align the new push button with the holes in the toilet tank. Insert the screws and tighten them until the button is secure. Do not overtighten the screws.

6. Turn on the Water Supply

Turn on the water supply to the toilet. Flush the toilet to test the new push button.

7. Adjust the Push Button (Optional)

If the push button is not working properly, you may need to adjust it. To do this, loosen the screws that hold the button in place. Move the button up or down until it is in the correct position. Tighten the screws to secure the button.

Troubleshooting

• The push button is not working. Make sure that the push button is properly installed and that the push rod is not damaged or kinked. If the problem persists, you may need to replace the flush valve.
• The toilet is running continuously. This could be caused by a faulty push button or a damaged flush valve. Replace the push button or flush valve as necessary.
• The toilet is not flushing properly. This could be caused by a weak push button or a clogged flush valve. Adjust the push button or clean the flush valve as necessary.

Final Note

Replacing a toilet flush push button is a simple task that can be completed in a matter of minutes. By following these step-by-step instructions, you can easily restore your toilet to proper working order and avoid costly repairs.

Questions We Hear a Lot

1. What is the purpose of a toilet flush push button?
The toilet flush push button is a device that is used to activate the flush valve, which releases water from the toilet tank to flush the bowl.

2. How often should I replace my toilet flush push button?
The frequency with which you should replace your toilet flush push button depends on how often the toilet is used and the quality of the button. In general, it is a good idea to replace the button every few years or as needed.

3. What are the signs that my toilet flush push button needs to be replaced?
Some of the signs that your toilet flush push button needs to be replaced include:

• The button is sticking or not working properly.
• The toilet is running continuously.
• The toilet is not flushing properly.
• The button is damaged or corroded.